LD/Ops SIG Weekend - Day 2

Instead of operating on a cool layout with other meet attendees as in previous years, on the second day of the meet we had a panel discussion with the hosts of layouts that would have operated if we could have. I joined to represent Silicon Valley Lines, and did get to talk about the Welztalbahn for a minute, too.

Kudos to the organizing committee for making this very different event happen under difficult circumstances. Everything worked smoothly for attendees and presenters.

Comments

Post a Comment

Popular posts from this blog

Snoqualmie Falls Hydropower Museum

Image
Generator 5 was installed in the underground cavity of plant 1 at Snoqualmie Falls in 1905. It has a generation capacity of 5600 kilowatts. It uses a Francis turbine, which is more efficient than the Pelton wheels used in the other 4 generators installed at plant 1. The water enters the turbine from the sides and then falls straight down from the center of the turbine into a draft tube. The energy of the flowing water is transferred to the shaft of the turbine in form of torque. The shaft is connected to the generator, visible in the rear in the photo at the top of this post. In 2011 the plant was modernized and generator 5 was moved from plant 1 to the hydropower museum. "Wow!" The shops building was moved here from its original site and has various artifacts and equipment that was removed from the plant's underground cavity and control room. Control panel. Knife switches.
Read more

Sunday: Kandersteg

Image
[ Three Tunnels and Winter ] Kandersteg station has the control tower right on the platform at track 1. However, it appears the big control table is no longer in use. Instead, everything's controlled via computers in a back room. Here's the line diagram schedule. This photo was taken through two windows and blinds, so unfortunately it's hard to make out train indications. However, I believe the rather tight column of red lines in the middle of the screen represents the auto transport trains traversing through the Loetschberg tunnel. As soon as the sun disappears behind the mountains, it gets cold. I didn't want to stand here for another 30 minutes until the RegioExpress to Bern was due, so I decided to take the RE 4275 through the Loetschberg tunnel to Goppenstein, where I'd have about 5 minutes to get to the other platform for the return trip and on to Bern. While waiting for the RegioExpress, this KLV train with double-header DB class 185 barrels through the stat...
Read more