Bernhards Random Ramblings BACKUP

I converted this BRAWA Koef II to digital operation using a regular Lokpilot 3.0, which just barely fit into the cab. Switching cars with this little locomotive is a lot of fun, so I sprung for a Lokpilot 4.0 micro DCC and the ESU Powerpak. Here's a view of the locomotive with the cab roof off. It's easy to see how much smaller the new decoder is... The first step was to connect the Powerpak to the respective soldering pads on the decoder. The pads are just as small as one would expect from such a tiny decoder. Technically, the fine tip of my soldering iron is still too big for this job but I managed to solder the cables in place with the edge of the tip. Using a magnifying glass, reading glasses, steady hands, and going slow helped with this step. The motor and pickup wiring inside the locomotive is hooked to a 4-pin connector. I unsoldered the existing decoder, soldered connections for the new decoder (I should have ordered the version with wires attached... ), and after som...

During tonight's operation session, Gabe is taking train #370, made up of mostly white MDT reefers, northbound to the Tracy creamery and Victoria. Meanwhile Josh in the foreground gets rock train #420 ready to depart for the quarry interchange in Jacksonville. The transitional yard tracks in the foreground are quite busy with cars having arrived on earlier trains and cars ready to leave with trains later in the session. My instant switch list creator software had quite a workout tonight getting the Nowheres hump yard organized (not pictured).

[ Schrebergarten posts ] In the last couple days I fixed the track in place, installed cork underlay under and around the locomotive shed and the adjacent parking lot, and glued the track in place. It actually sits on a bead of clear silicone, but close enough. Tonight I got the gardens tacked in place and shaped the ground in the area using tinted Scuptamold and the artists spatulas in the front of the picture. When I was done, I realized I hadn't painted the track yet. That's gonna be fun in tight quarters ...

The Koef II in Talheim needs a home. Now that the Schrebergarten is ready for installation on the layout, and the run-around track is rearranged, it's time to build the locomotive shed. I used Vollmer's Nr. 5750 "single stall engine shed" kit as the basis for this kit bash. I assume there is some history to the building and it used to house a small steam powered switcher, that has been replaced with a Koef a while ago. The building thus is in a somewhat dilapidated but still serviceable condition. The spur to the shed comes off the curved industrial track to Kopper and Gregorius, and hits the room wall at an angle.  I wanted to have as much shed as possible, and built the shed as a 3/4 relief with the rear cut off. I also didn't want to build yet another red brick structure on the layout, as they are not really typical for the southern Black Forest, and the colors also needed help to differentiate the building some more. This required a few modifications to the w...

On a rainy Sunday morning I found myself today in the Sierra Nevada foothills waiting to "Ride the Logger" . This was a fun one hour trip on an old logging right of way, with 3 truck Shay Nr. 10 leading the train. We very much enjoyed the -- almost private -- early morning run through light drizzle into the forest. Apparently a tour bus was booked for this departure, but they didn't show.  So this trip had a total of six passengers...

This locomotive shed needs to go into a rather tight spot against the wall in Talheim, so it needs a few modifications. Franziskaner helps to keep all the cuts nice and straight ...

[ Schrebergarten posts ] Test fitting the garden spots on the layout. Despite the runaround modifications in Talheim , the gardens still fit the space quite nicely. Some slight adjustments and gentle application of Scuptamold, paint, and ground cover will blend everything together . With that done I can also finish blending layout and backdrop in this area. Earlier posts describing the build can be found here .

[ Schrebergarten posts ] While finishing the first garden in June, I had run out of fences and didn't really want to fill the garden area before it could be properly delineated. Vacation, events , other projects , work , and summer in general got in the way, so I didn't return to working on the gardens until last weekend. I painted and weathered enough fences to close the gap, and then started with the remaining vegetables from Busch's kit 1222, and some more Noch plants made from various fibers and foliage. Contrary to the first garden, the second one was supposed to be well maintained and very neat. Making and planting the vegetables takes forever, but isn't particularly hard. Once I was satisfied with the vegetable part of the garden, I enclosed the remainder with blue painters tape and made a nice dense lawn from Scenic Express' Late Summer static grass. For the paths between the vegetable beds I used very fine N-scale ballast from Arizona Rock & Minerals...

The patio roof is leaking. With all the rain in the forecast this winter, it was time to do something about that. Last weekend I picked up (almost) enough material to redo the roof. This is the second time I'm doing it. The previous time was soon after we moved into this place. However, 2 years later a several rafters in the wood framing over the patio needed replacement. The contractor building the new framing also reinstalled the roof. Let's just say they didn't do a stellar job putting the roof panels back together... This morning Pascal and I got to work on taking off the old panels, and install new ones. We worked our way from left to right. By noon a few new panels are installed. I'm intentionally not taking off the old panels all at once to reduce wobble when walking on the patio roof framing. The little cat is keeping me company throughout the day. The lawn is collecting panels. Old ones on the left, new ones on the right. At the end of the day I'm installin...

Musicians from the SF Opera visited the office today, and played the Overture of The Magic Flute with musically inclined co-workers on-stage. They went on to tweak the arrangement a bit, discussed how the orchestra comes together in rehearsals, talked about the role of conductor, ... along the way did a working rehearsal right there in the tech talk area. Super-interesting to watch and listen to. A co-worker of mine invited me to come and watch. I'm glad I did. The music was beautiful and I continue to be blown away about how good a classical orchestra can sound in even fairly utilitarian spaces I feel like we should really visit the Opera in the city some time...

Out and about while walking the dog tonight, the last bit of daylight is hanging in the clouds. A few minutes later it was all gone.

A couple years ago we had a Hans Grohe thermostatic shower valve and trim installed during a bathroom remodel. These valves are excellent at keeping temperature while in shower, even when other users in the house turn on hot or cold water. Over time, however, the temperature handle started to loose friction and moved by itself, which turned an enjoyable shower experience into an annoyance. In early September I contacted Hans Grohe technical support for advice. After they got the exact part numbers from me (04226000 "thermostatic trim", and 01850181 "rough i-box") they sent out replacement parts no questions asked. Today I finally installed the replacement parts. First I removed the handle and pulled off the trim. Yes, we have hard water... The top of the thermostatic cartridge Pulling off the trim should be easy, though for a little while I wasn't sure if I was doing this right. It's just pushed on top of the cartridge, but sat quite tight in the base trim...