Bernhards Random Ramblings BACKUP

This is not a common sight on my commute, so I had to stop and take a couple photos. It's interesting how far away from the herd the shepherd placed his trailer... As you can tell, the green grass is pretty much gone, and summer is almost here

In order to fit the new turnout into the existing track arrangement, I cut off the current-conducting tabs underneath the track on the two short track pieces. That way I limit hacking the track to cheap track pieces, instead of the turnouts. I also removed the rail joiners on that end of the track sections and replaced them with shortened Atlas Code 100 joiners. Before this new turnout, the whole curve was a detected section. I want to retain train detection in the area, but cover trains from either direction, so I moved the detected section to the two tracks sections between the turnouts, and soldered the cable to the rail joiner. The track fits perfectly. I'll leave it like this for tonight. Next up is building the embankment to the wall, and making sure that the new track performs properly before painting and ballasting.

I'm back at Tony Thompson today with two other local model railroaders for a very enjoyable operations session on Tony's Southern Pacific proto-freelanced branch line set in 1953. Tony likes to change things around the layout. Compare the photo above with the same view in the 2017 post . As a team of conductor and engineer we worked Ballard and Santa Rosalia, then switched sides and roles and switched Shumala. A fun afternoon that went by way too fast, even with the fast clock set to 1:1 ratio ... Lots of work in Ballard.

As I'm building my first station module, I do need to connect it to the existing Welztalbahn. Here's the curve on the south end of Emsingen. When I built this section of the layout in 2010  I didn't really consider extending it, although the thought of doing so entered my mind every now and then since. Now I'm getting serious. Most of the layout is built with sectional track pieces. I need to remove one curved piece to fit the turnout. Since the track continuation on both sides is fixed, simply disconnecting the track pieces is not an option. Cutting the rails with the Dremel tool resolved that problem quickly. I used a wide artists spatula to gently lift the rails from the cork base and cut through the silicone caulk that held the rails in place until ballasting. Speaking of ballasting, I didn't do a particularly good job with this section 5 years ago , which made removing the ballast very easy. In the photo below I already marked where the track to the extension...

We're doing work in our back yard, and hit a sprinkler pipe. I cleaned up the hole ... ... and installed this snap-on piece to cover the hole. The glue I bought  the last time this happened in 2007  was still good. 

Once again a good and busy session. Once again I played mostly conductor, while a visitor ran the engine for our train. At the end of the evening, everyone was tired and happy. More photos are over at the Silicon Valley Lines web site .

This how I was planning to arrange the turnout to the layout extension. The branch to Talheim curves off to the right, and the branch to the extension goes straight towards the wall in parallel to the freight tracks on the left, and will leave the room through a minimum-sized hole. Alternatively, I could swap the 2234 piece to the foot of the turnout, and run at a slight angle away from the freight tracks and hit the wall a little bit further to the right. This would allow me to keep the rock between the branch and the track bumper, dress it up with some more bushes and thus gain a view block that would hide most of the hole from the Talheim operator who sits further to the left. Making the respective change on the track plan confirms it's feasible with some minor adjustments to the connecting track.

With several of the turnouts built , it's time to prep the turnout motors for installation.

The Puko-strips from Weichen Walter stick out a couple millimeters under the turnout. I'm using strips cut from a sheet of very thin cork with an adhesive backing and stick them under the turnout.

Recently, I've been working more seriously on converting Peco StreamLine Code 100 turnouts for use with the Maerklin 3-rail system (previous posts here and here ). The main motivation for doing this is availability of turnouts with larger radius and more variety than what I can get from Maerklin's track program. The drawback is the need for extensive modifications of the turnouts. The photo above shows a converted Peco SL-E98 large radius wye turnout with puko strips from Weichen Walter glued and partially melted to the turnout. The Electrofrog construction looks really nice, but requires that the frog rails are cut and insulated from the outer rails. With a radius of 1824mm and 12 degree angle at the frog, there is no turnout available from Maerklin that allows similarly graceful curvature. Below is a Peco SL-95 medium radius Insulfrog. With a radius of 914mm and 12 degree angle, this turnout is pretty close to Maerklin's 22716 "slim turnout". I chose Peco Code ...

We discovered a particularly nice salamander while cleaning up the patio today. Unfortunately, one of the neighborhood cats already go ahold of him, and he wasn't doing too well.

I love this section of my commute on Coyote Creek Trail.

For a work event we went Go-Kart racing today. Lots of fun with a great group of people. To my utter surprise I finished the final race in 4th place out of 11 racers.

I'm making progress on a revised Web site for Silicon Valley Lines, and while at it I'm trying out WordPress. WP has made quite some progress compared to the last time I played around with it a few years ago. Now much more streamlined and slick. Tempting ...

I fixed the tire yesterday evening. On the way home I noticed another couple nails on the same stretch of road where I punctured the tire yesterday and stopped to get them off the street. 10 minutes later I had picked up a handful. Must have fallen off a work truck or something ...

While I was waiting for my wife to pick me up with this punctured tire, I picked up a few more nails and screws from the street and threw them away.

I found some thin cork in my stash and glued it under the converted turnout . That'll do.

I'm using a kit from Weichen Walter to convert a Peco SL-91 Code 100 turnout for use with Maerklin rolling stock and locomotives. Following the instructions I'm glueing the point contacts to the turnout. This takes some patience, as glue doesn't dry as quickly as the melt-in-the-ties method I used on the flex track with Module One . This is really a test and practice to see what it takes to convert 2-rail turnouts for use with Maerklin. The look is comparable to regular Maerklin turnouts, the center contacts  are quite visible. I'll let the glue dry, and wire it up tomorrow.

The Amador Central Railroad is the successor of the Ione & Eastern Railroad connecting Ione to Martell halfway between Jackson and Sutter Creek. The railroad was started in 1902 and the first train operated to Martell in 1904. Proposed extensions where never built. For most of it's existence the line was owned by lumber companies and carried forest products to the connection with the Southern Pacific down the hill at Ione. Today the line is jointly owned and maintained by two local historical societies and sees occasional recreational use with speeders.

Sutter Creek has maintained that gold rush downtown flair with many buildings dating back to the 1800's.  We very much enjoyed our time here. The atmosphere is relaxed and quaint. Main St maybe has an over-abundance of wine tasting rooms ...

On the way back to Sutter Creek we stopped at Daffodil Hill, a ranch that normally is open for a couple weeks in the spring for visitors to enjoy the view of hundreds of thousands of daffodils on a hill behind the ranch buildings. Unfortunately, on the first weekend of the season this year they got overrun by thousands of visitors, overwhelming the ranch facilities as well as leading to traffic collapse on the roads in the vicinity. The crowds didn't stay on the path and walked into the flower beds, a pattern that's an all too common refrain heard from other locations, too. As a consequence, the family owning the ranch aborted this year's season and is considering alternative approaches for crowd management. We took a couple photos from the gate and the street, and got a glimpse of the hill. It's a beautiful setup, and I can't imagine that a visit with the crowds would be nearly as enchanting as our view from the fence line. Several peacocks are hanging out on the g...